Webscorer app version history
iPad and iPhone app
Version 3.1
Aug 7, 2018
- Chip timing
- Activate reader for chip start before gun start
- Validation of “Chip ID” length when using partial chip ID
- Taps recorded data now includes reader IP address, antenna port # and chip signal strength
- Option to turn off audible beep for chips not in the race
- Races with laps
- Fixed lap races can now have up to 200 laps
- Allow inserting a new lap via “Edit splits” in a time-limited lap race
- Merge start lists
- Allow racer check-in using 2 or more devices
- Merge now updates bib & chip ID, if missing
- New sport types
- Motor sports - dirt bike
- Swimrun
- Bug fixes
Version 3.0
May 24, 2018
- Visual chip start
- Applies when "Chip start time = On"
- Racer boxes switch color as chip is detected at start
- After specified timeout, racers whose chip was not detected get race start time
- Chip start times are editable via the "Fast-tap view"
- Works in mass starts & wave starts
- More flexible merge start list
- Applies when updating a previously downloaded start list
- Handy in races where online check-in continues while other waves are already racing
- Racers downloaded without bib (or chip ID) will initially be marked as DNS
- Once updated on website, “Merge start list” will undo DNS and add racer’s bib and chip IDs
- New lap control option
- Applies to races where there’s no racer check-in
- The start list may have lots of racers not racing
- After all racers have a recorded lap, the rest are likely DNS
- This option marks all racers with no laps as DNS
- Bug fixes
Version 2.9.1
Version 2.9
February 7, 2018
- Revised user interface
- Lap time editing via Edit laps or Edit splits
- Refresh start list from Webscorer.com after race started
- Hide racer boxes not yet started in wave start
- New sport: Paddling - dragon boat
- iPhone X support
- NFC chip timing support
- Bug fixes
Version 2.8
August 24, 2017
- Merge start lists from multiple devices via Bluetooth
- Enter day-of-race entries using multiple devices
- Combine the data onto one device via Bluetooth for race start
- No limit on the number of devices entering data
- Allow excluded laps and skipped laps in the same race
- Eg. an enduro race with 2 distances
- One distance has 3 stages, the other distance has 4 stages
- Exclude transition laps, skip the non-race laps for the shorter distance
- Support multi-distance races with fixed and time-limited laps
- Barcode scanner timeout: “ignore repeat scans” for a period of time
- Helps avoid inadvertent repeat scans back-to-back
- Useful especially when racer does self-scanning
- Bug fixes
Version 2.7
June 1, 2017
- Sort data by tapping the column header in fast-tap view
- Sort by seq
- Sort by bib
- Sort by name
- Sort by race clock
- New “Skipped laps” feature for multi-distance races where not all racers go through all checkpoints
- Support for using partial chip ID with “Chip ID = Bib” setting
- Support for using partial barcode ID as bib number
- Bib sync
- New timing mode to collect bibs in any order at a later time
- Racers are handed a sequence number or a barcode at finish
- Time-limited lap races
- Ability to undo “Finish wave”
- Ability to undo “Finish racer”
- New sport type
- Cycling - gravel
- Bug fixes
Version 2.6.1
Version 2.6
March 22, 2017
- Simplified split-timing for coaches in an interval start race
- Streamlined user interface focused on splits
- Easy way to create your own start list with a bib range
- No need to enter all racer names on the start list
- Support for chip start time for all start types
- Racer is assigned chip start if chip detected within assigned timeout
- Otherwise racer is assigned the manual start time for the mass start / wave start
- Helps prevent missing start times with busy / wide start areas
- Chip-timing improvements
- Change all chip-timing settings after race has started via “Race control”
- Recorded chip detects are reprocessed using updated settings
- Change time-outs, type of chip encoding, partial chip ID settings etc.
- Improved start time handling with external timer & start gate
- Racer is assigned gate open time if it occurs +/- 3 seconds of interval start time
- Otherwise racer is assigned the interval start time
- Helps prevent timing issues with accidental gate openings
- New sport types
- Cycling
- Cycling - adaptive
- Bug fixes
Version 2.5
January 12, 2017
- Hardware alternatives for tapping the screen
- Bluetooth button for recording time stamps (https://flic.io)
- Bluetooth bar-code readers for recording bib numbers
- Chip timing:
- Support for the RaceResults chip-timing system
- Compatibility with RadiantSensors WiFi RFID reader
- Compatibility with Alien Technology ALR-F800 RFID reader
- First detect / best detect config option
- Time-limited lap races
- Option to mark racers with no laps as DNF or DNS
- Lap control: move all racers to leader lap
- Timing mode = Multi-device splits:
- Any device can mark racer as DNF in a multi-device LIVE race
- Support for time-limited lap races
- Improved Bluetooth reliability
- Bug fixes
Version 2.4
October 13, 2016
- Different beep when tapping the racer box vs. timer button
- Option to hide racer boxes for waves that have not yet started
- Races with laps:
- Allow renaming of lap names on the app for website results
- Set last lap in time-limited lap races via “Lap control"
- Support for handicap-adjusted split times
- Timing mode = Multi-device splits:
- App jumps directly to “Timing Points” panel when downloading a start list set for multi-device splits
- Racer marked as DNS, DNF or DSQ on device timing last lap auto-updated on every device with LIVE results
- Chip timing:
- Compatibility with Motorola / Zebra FX9500 RFID reader
- Support for both Decimal & Hex encoding when Chip ID = Bib
- Taps recorded data now posted during LIVE results
- Support printing of individual racer results directly from the app
- Change password option via Settings
- Bug fixes
Version 2.3
Version 2.2
Jan 29, 2016
- Improved LIVE results:
- Now scales to any size race
- Uses less data to update results
- "Show splits” view allows error corrections:
- Cancel tap / Swap racer / Edit time / Edit racer info
- Enables timing with (calculated) results visible
- Separate timeouts for ignoring repeat chip detects:
- After start
- After each lap
- New external timer features:
- Rerun race with time stamps stored by timer
- Edit start time stamps in interval start race
- Bug fixes
Version 2.1
Nov 10, 2015
- Support for RFID readers by
- Alien Technology
- Honeywell / Intermec
- Impinj
- Motorola / Zebra
- ThingMagic
- Chip-timing improvements
- Option to match partial chip ID
- Auto-discover reader’s IP address via a scan
- Different BEEP for chip IDs with no match
- Edit non-matched chip IDs during the race
- Support for photocell / start gate timers by
- ALGE Timing
- Microgate
- Summit Systems
- TAG-Heuer
- Option to record times at an accuracy of
- 1 second
- 0.1 second
- 0.01 second
- 0.001 second
- Improved performance for bigger races
- Bib sync: insert a missed time / bib in the middle of sequence
- iOS 9 support
- Bug fixes
Version 2.0
June 2, 2015
- Fully automated RFID chip-timing
- Support for Orbiter Inc. RFID readers
- The app receives the time stamp & chip ID from the reader via WiFi
- With Chip ID programmed as the bib number, you can use standard start lists
- You can easily mix manual timing for racers whose chips did not read
- Additional chip types & readers coming soon
- Automated time stamps with starting gate & finish line photocell
- Support for TAG Heuer and ALGE-TIMING devices
- Meets FIS requirements for alpine & cross-country skiing timing
- The app receives the time stamp recorded by the device via WiFi
- The bib number (or name) must be entered manually on the app
- Flexible relay
- No need to pre-assign racers per leg
- Can be used in fixed or time-limited lap races
- Results show which team member did which lap
- Perfect for mixed solo / team relays
- Webscorer online registration now supports (flexible) relays
- Posted results use the location set for a start list or registration
- Additional "Info"" fields to retain racer info from registration to results
- Bug fixes
Version 1.7.2
November 20, 2014
- More audible "beep" when tapping the timer button or racer boxes
- Use .TXT as the file extension when emailing start lists or results
- Bug fixes
Version 1.7.1
November 3, 2014
- Timing enhancements:
- Audible 5-sec countdown for starting racers
- Always show leader in "Show splits"
- More consistency for error corrections during race
- New results options:
- Easier to follow LIVE results with the app
- Option to show year of birth (instead of age) in results
- New team scoring option: High points per place (100...1)
- Option to show distance (vs. laps down) in time-limited lap races
- Email results from the app as HTML or as .TXT
- Print results from the app via Apple AirPrint
- New private fields to track racer info from registration to results
- New sport types:
- Adventure racing
- Cycling - track
- Duathlon - run and shoot
- Hiking
- Running - obstacle course
- Trekking
- General:
- Faster 64-bit code with newer iOS devices
- Usability improvements
- Bug fixes
Version 1.6.3
January 2, 2014
- Integrated "show splits" view in the main timing panel
- Toggle between split and edit views via "Show splits" and "Hide splits" toolbar buttons
- With "Show splits", racer's place in race shown immediately after time tap
- No need to exit the timing panel to see race status
- Paddling sports expanded & combined under common theme:
- Paddling
- Paddling - canoe
- Paddling - kayak
- Paddling - outrigger
- Paddling - paddleboard
- Paddling - SUP
- Paddling - surfski
- Quicker way to do "racer check-in" on the main start list panel
- New option for a predicted-time race: faster time than predicted is negative
- Updated relay start list format can be imported via iTunes
- Bug fixes
Version 1.6.2
October 24, 2013
- Support for a "predicted-time" race (closest estimated time wins)
- New results option: Overall by gender
- Time-based handicaps
- Download series standings to the app
- "Female / Male" gender for mixed teams
- Team scoring options set independently from individual results options
- iOS7 compatibility
- Upgraded graphics
- Usability improvements
- Bug fixes
Version 1.6.1
June 22, 2013
- New timing mode "Name sync"
- Similar to "Bib sync", but for a race with no bib numbers
- 1st device records just the time stamps as racers cross the finish line
- 2nd device records the racer names in the order of finish, or
- At finish, racers are handed a sequence number on a sticker / popsicle / card
- Racers then go to a results desk with a 2nd device to report their name & number
- Relay races enabled for all start types, results options and timing modes
- Team scoring now supports the same results options as individual races
- Team scores by category, overall by distance, or overall all distances
- New penalty options:
- Penalties can be applied per lap and via multiple devices in a "Multi-device splits" race
- Time adjustment per numeric penalty can vary by distance
- "Fastest lap" race uses penalty-adjusted time to determine the best lap
- Support for time penalties and time bonuses in the same race
- Enhancements to "Taps recorded" history (race clock taps):
- Time stamps can now be edited via "Taps recorded" panel even after the race is finished
- Includes a time stamp for any pre-entered bibs (handy to fix results if operator forgot to tap the timer button)
- "Taps recorded" can be downloaded as .TXT from website, or saved as .TXT on the app
- Bug fixes
Version 1.5.2
May 6, 2013
- New "Lap control" toolbar icon in timing view
- Race with fixed # of laps:
- Move racer to next lap (missed a lap time)
- Pull racer (mark as laps down)
- Finish racer (time as of last completed lap)
- Race with time-limited # of laps:
- Move racer to next lap (missed a lap time)
- Finish racer (mark as laps down if not on lead lap)
- Mark multiple racers at the same time as DNS, DNF or DSQ
- Status line split time shows difference to 2nd place for new leader
- Bib numbers shown in bigger font in the racer-box view
- Bug fixes
Version 1.5.1
March 27, 2013
- Support for start lists in the FAN timer
- The FAN timer now behaves identically to the PRO version
- A louder "Beep" when tapping the timer button
- Simplified race setup for wave starts
- In a wave start, you can adjust the starting wave for racers who started in a wrong group during / after the race
- Adjust for an incorrect race or wave start time during / after the race
- Results from a "Multi-device splits" race can be combined via Bluetooth when there's no cell coverage
- Use any posted race as template (easy way to view race setup used by others)
- Advanced search for results & start lists
- Turn live results on / off & public / private during the race
- Usability improvements
- Bug fixes
Version 1.4.1
December 12, 2012
- Option to order results with slowest time as the winner (e.g. rodeo)
- Option to order results by fastest lap for each racer (e.g. qualifying round in downhill mountain biking)
- Show penalties in results & apply penalties to finish time (e.g. biathlon)
- Optional "Adjusted time" ranking based on a handicap (e.g. sailboat racing with different boat types)
- Built-in age- and gender-graded handicap tables (based on standardized running records by age)
- Switch freely between the three timing views: Normal view / Fast-tap view / Keypad view
- Always show "Race clock" time on Fast-tap list for easy editing of tap times
- Phone / computer keypad layout option
- Native iPhone 5 support
- Feature parity between iPhone and iPad versions
- Bug fixes
Version 1.3.3
September 20, 2012
- Team scoring: combined points (e.g. high-school / college cross-country running)
- Team scoring: combined times
- Support for individual start point-to-point races (Timing mode = Multi-device splits)
- Allow editing of split data after race is finished in a Multi-device splits race
- Ability to get .TXT results directly from the device via iTunes
- Show # of racers left in race via "Race Finish" panel
- Support for starting 2+ racers at the same time in an individual start race, or per lap
- Results options can be changed after the race
- Way to search racer by bib in start list, results
- DNS entries are no longer shown in results
- Access to all racer info when viewing live results via the app
- Support for marking a racer as DNF, DSQ via Fast-tap view
- Device Race ID now editable (Race ID must match for all devices "Multi-device splits" race)
- Numerous usability improvements
- Bug fixes
Version 1.3.2
June 23, 2012
- All start types now supported with Timing mode = Multi-device splits
- All start types now supported with Timing mode = Bibs in finish order
- All start types now work identically in all timing views (Normal view, Fast-tap view, Keypad view)
- New "Race ID" toolbar icon to check race setup when multiple devices used to time the same race
- Excluded laps (not counted toward total time) now automatically hidden from results view
- Bug fixes
Version 1.3.1
May 24, 2012
- Subscription pricing model for PRO
- Posting from FAN is now free
- Support for "Time-limited" races (e.g. cyclocross)
- In a lap race, allow laps to be excluded from total time
- Racer names can be up to 40 characters
- Lap times viewable when following a live race
- Completed fast-tap entries can stay on screen until end of race
- Easier way to record an unknown racer / no bib
- Edit all racer data during the race off the fast-tap list
- "Bibs recorded" data is included when posting results
- Option to automate setting default custom wave for all racers
- New results option: "Overall - all racers" (e.g. distances = Road Bike 30km & TT Bike 30km)
- Option to exclude top 3 in overall results from age category results
- Male / Female option in "Racer Info" (used for website results)
- Support for seeding racers within entire start list
- Allow marking racers DNS before the race in batch mode
- Support for racers marked as DNS in posted start lists
- Bug fixes
Version 1.2.2
January 31, 2012
- Private / public website posting option
- Completed entries stay until cleared to results in races without a start list
- "Show time" / "Show difference" toolbar buttons for viewing results
- Distance and category names can be up to 25 characters
- Bug fixes
Version 1.2.1
December 15, 2011
- Larger status line for the Race Finish panel on the iPad version (for coaches' use)
- You can mark your own team racers to show in green highlighting in Show Splits – use "My Team Racer" as Team name
- Show Splits results view view available for archived / downloaded races as well
- Show Splits results view is now the default live race view for any race with multiple distances, categories or laps
- "Age" as an additional (optional) parameter in start lists and results
- Support for hundredths and thousandths of second in downloaded results (if uploaded to Webscorer.com via .TXT)
- Downloaded start lists show separately the racers for each distance and category – and custom waves
- Bug fixes
Version 1.1.1
Android app
Version 3.1
Aug 7, 2018
- Chip timing
- Activate reader for chip start before gun start
- Validation of “Chip ID” length when using partial chip ID
- Taps recorded data now includes reader IP address, antenna port # and chip signal strength
- Option to turn off audible beep for chips not in the race
- Races with laps
- Fixed lap races can now have up to 200 laps
- Allow inserting a new lap via “Edit splits” in a time-limited lap race
- Merge start lists
- Allow racer check-in using 2 or more devices
- Merge now updates bib & chip ID, if missing
- New sport types
- Motor sports - dirt bike
- Swimrun
- Bug fixes
Version 3.0
May 24, 2018
- Visual chip start
- Applies when "Chip start time = On"
- Racer boxes switch color as chip is detected at start
- After specified timeout, racers whose chip was not detected get race start time
- Chip start times are editable via the "Fast-tap view"
- Works in mass starts & wave starts
- More flexible merge start list
- Applies when updating a previously downloaded start list
- Handy in races where online check-in continues while other waves are already racing
- Racers downloaded without bib (or chip ID) will initially be marked as DNS
- Once updated on website, “Merge start list” will undo DNS and add racer’s bib and chip IDs
- New lap control option
- Applies to races where there’s no racer check-in
- The start list may have lots of racers not racing
- After all racers have a recorded lap, the rest are likely DNS
- This option marks all racers with no laps as DNS
- Bug fixes
Version 2.9
February 7, 2018
- Revised user interface
- Lap time editing via Edit laps or Edit splits
- Refresh start list from Webscorer.com after race started
- Hide racer boxes not yet started in wave start
- New sport: Paddling - dragon boat
- Flic button works in Results and Start list panels
- Bug fixes
Version 2.8
August 24, 2017
- Merge start lists from multiple devices via Bluetooth
- Enter day-of-race entries using multiple devices
- Combine the data onto one device via Bluetooth for race start
- No limit on the number of devices entering data
- Allow excluded laps and skipped laps in the same race
- Eg. an enduro race with 2 distances
- One distance has 3 stages, the other distance has 4 stages
- Exclude transition laps, skip the non-race laps for the shorter distance
- Support multi-distance races with fixed and time-limited laps
- Barcode scanner timeout: “ignore repeat scans” for a period of time
- Helps avoid inadvertent repeat scans back-to-back
- Useful especially when racer does self-scanning
- Bug fixes
Version 2.7
June 1, 2017
- Sort data by tapping the column header in fast-tap view
- Sort by seq
- Sort by bib
- Sort by name
- Sort by race clock
- New “Skipped laps” feature for multi-distance races where not all racers go through all checkpoints
- Support for using partial chip ID with “Chip ID = Bib” setting
- Support for using partial barcode ID as bib number
- Bib sync
- New timing mode to collect bibs in any order at a later time
- Racers are handed a sequence number or a barcode at finish
- Time-limited lap races
- Ability to undo “Finish wave”
- Ability to undo “Finish racer”
- New sport type
- Cycling - gravel
- Bug fixes
Version 2.6
March 22, 2017
- Simplified split-timing for coaches in an interval start race
- Streamlined user interface focused on splits
- Easy way to create your own start list with a bib range
- No need to enter all racer names on the start list
- Support for chip start time for all start types
- Racer is assigned chip start if chip detected within assigned timeout
- Otherwise racer is assigned the manual start time for the mass start / wave start
- Helps prevent missing start times with busy / wide start areas
- Chip-timing improvements
- Change all chip-timing settings after race has started via “Race control”
- Recorded chip detects are reprocessed using updated settings
- Change time-outs, type of chip encoding, partial chip ID settings etc.
- Improved start time handling with external timer & start gate
- Racer is assigned gate open time if it occurs +/- 3 seconds of interval start time
- Otherwise racer is assigned the interval start time
- Helps prevent timing issues with accidental gate openings
- New sport types
- Cycling
- Cycling - adaptive
- Bug fixes
Version 2.5
January 12, 2017
- Hardware alternatives for tapping the screen
- Bluetooth button for recording time stamps (https://flic.io)
- Bluetooth bar-code readers for recording bib numbers
- Chip timing:
- Support for the RaceResults chip-timing system
- Compatibility with RadiantSensors WiFi RFID reader
- Compatibility with Alien Technology ALR-F800 RFID reader
- First detect / best detect config option
- Time-limited lap races
- Option to mark racers with no laps as DNF or DNS
- Lap control: move all racers to leader lap
- Timing mode = Multi-device splits:
- Any device can mark racer as DNF in a multi-device LIVE race
- Support for time-limited lap races
- Improved Bluetooth reliability
- Bug fixes
Version 2.4
October 13, 2016
- Different beep when tapping the racer box vs. timer button
- Option to hide racer boxes for waves that have not yet started
- Races with laps:
- Allow renaming of lap names on the app for website results
- Set last lap in time-limited lap races via “Lap control"
- Support for handicap-adjusted split times
- Timing mode = Multi-device splits:
- App jumps directly to “Timing Points” panel when downloading a start list set for multi-device splits
- Racer marked as DNS, DNF or DSQ on device timing last lap auto-updated on every device with LIVE results
- Chip timing:
- Compatibility with Motorola / Zebra FX9500 RFID reader
- Support for both Decimal & Hex encoding when Chip ID = Bib
- Taps recorded data now posted during LIVE results
- Support printing of individual racer results directly from the app
- Change password option via Settings
- Bug fixes
Version 2.3
Version 2.2
Jan 29, 2016
- Improved LIVE results:
- Now scales to any size race
- Uses less data to update results
- "Show splits” view allows error corrections:
- Cancel tap / Swap racer / Edit time / Edit racer info
- Enables timing with (calculated) results visible
- Separate timeouts for ignoring repeat chip detects:
- After start
- After each lap
- New external timer features:
- Rerun race with time stamps stored by timer
- Edit start time stamps in interval start race
- Bug fixes
Version 2.1
Nov 10, 2015
- Support for RFID readers by
- Alien Technology
- Honeywell / Intermec
- Impinj
- Motorola / Zebra
- ThingMagic
- Chip-timing improvements
- Option to match partial chip ID
- Auto-discover reader’s IP address via a scan
- Different BEEP for chip IDs with no match
- Edit non-matched chip IDs during the race
- Support for photocell / start gate timers by
- ALGE Timing
- Microgate
- Summit Systems
- TAG-Heuer
- Option to record times at an accuracy of
- 1 second
- 0.1 second
- 0.01 second
- 0.001 second
- Improved performance for bigger races
- Bib sync: insert a missed time / bib in the middle of sequence
- Android 6 support
- Bug fixes
Version 2.0
June 2, 2015
- Fully automated RFID chip-timing
- Support for Orbiter Inc. RFID readers
- The app receives the time stamp & chip ID from the reader via WiFi
- With Chip ID programmed as the bib number, you can use standard start lists
- You can easily mix manual timing for racers whose chips did not read
- Additional chip types & readers coming soon
- Fully automated NFC chip-timing
- Support for programmable NFC chips with your Android device acting as the chip reader
- The app receives the time stamp & chip ID automatically when NFC chip is detected
- With Chip ID programmed as the bib number, you can use standard start lists
- You can easily mix manual timing for racers whose chips did not read
- Automated time stamps with starting gate & finish line photocell
- Support for TAG Heuer and ALGE-TIMING devices
- Meets FIS requirements for alpine & cross-country skiing timing
- The app receives the time stamp recorded by the device via WiFi
- The bib number (or name) must be entered manually on the app
- Flexible relay
- No need to pre-assign racers per leg
- Can be used in fixed or time-limited lap races
- Results show which team member did which lap
- Perfect for mixed solo / team relays
- Webscorer online registration now supports (flexible) relays
- Posted results use the location set for a start list or registration
- Additional "Info"" fields to retain racer info from registration to results
- Bug fixes
Version 1.7.2
November 14, 2014
- Timing enhancements:
- Audible 5-sec countdown for starting racers
- More audible "beep" when tapping the timer button or racer boxes
- Always show leader in "Show splits"
- More consistency for error corrections during race
- New results options:
- Easier to follow LIVE results with the app
- Option to show year of birth (instead of age) in results
- New team scoring option: High points per place (100...1)
- Option to show distance (vs. laps down) in time-limited lap races
- Email results from the app as HTML or as .TXT
- Print results directly from the app (requires Android version 4.4)
- New private fields to track racer info from registration to results
- New sport types:
- Adventure racing
- Cycling - track
- Duathlon - run and shoot
- Hiking
- Running - obstacle course
- Trekking
- General:
- Usability improvements
- Bug fixes
Version 1.6.3
August 15, 2014
- Initial release
- Compatible with iPad / iPhone version 1.6.3